Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

How much timing would you pull?

Old Oct 18, 2008 | 09:54 AM
  #1  
Z-RATED94's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: Nov 2007
Posts: 1,523
Likes: 0
From: Carol Stream Il.
Default How much timing would you pull?

My LT1 has 33 degrees at wot. I'm running about a 115rwhp shot with TR6s and 93 octane. Looking for opinions on how much timing to pull with the 685 box. Thanks
Reply
Old Oct 18, 2008 | 08:20 PM
  #2  
Duffster's Avatar
11 Second Club
iTrader: (103)
 
Joined: Aug 2005
Posts: 2,633
Likes: 1
From: South of West Point Iowa
Default

Isn't it like 2 degrees for every 50? If so, that would be safely 5 degrees right?
Reply
Old Oct 19, 2008 | 08:07 AM
  #3  
Z-RATED94's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: Nov 2007
Posts: 1,523
Likes: 0
From: Carol Stream Il.
Default

Originally Posted by Duffster
Isn't it like 2 degrees for every 50? If so, that would be safely 5 degrees right?
I guess, but some with stock timing hardly pull any, and some with less than a 100 shot have pulled none. I'm not saying it's smart, just looking for opinions. Thanks
Reply
Old Oct 19, 2008 | 10:24 AM
  #4  
tatasta's Avatar
TECH Regular
iTrader: (24)
 
Joined: Jan 2007
Posts: 447
Likes: 0
From: Nevada
Default

Maybe one or two degrees. Not that big of an issue until over 150 shot in my opinion. Need to watch for knock/detonation. The high end of timing that det. is controlled and a safe afr (11.8 - 12.4) is a good start. My experience has been my stock tune ran ok with 100 shot. I will go to 150 soon so it will need a total review on timing, afr etc........

Having the right safety systems is important. They can absorb some of your mistakes.

Good luck.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:42 PM.