here is what im trying to achieve. (im open to alternatives though)

coming out of my fuel rail i need a fitting that will allow me to adapt my FP gauge(autometer nexus) into the fitting, my fpss, and my fuel line for my HSW kit, but i DONT want the fuel line facing the front of the car, I would like it to preferabbly go towards the fenders (so i can route the fuel line under FRC. I was also debating on adding a FP gauge in this area also, but figured its alot if stuff. Please let me know what you can offer me. Thanks Chet M

p.s. i have fuel rail covers
also this is a stock 97/98 vette rail

 

Sent you a PM with a list. Thanks!

Nick

 

I know we have different fuel rails (you have a return system). This fits nicely under my FR Covers, I have since ditched the FPSS. Whats on the driver side of the "T" is an autometer Fuel Pressure sending unit.

-4 AN Swivel to a -4 An Male 90 with a 1/8" NPT to a 3 way Female 1/8" NPT "T"

 

you do have alot going on under there, gives me a good idea, how i can do things, just not gonna have my noid there, i will just have a feed line, and have hoid somewhere laying under the frc.