Custom painted Nitrous bottle
12-16-2008, 11:13 PM
#3
12 Second Club
Thread Starter
iTrader: (16)
Join Date: Jun 2005
Location: Charlotte, NC
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
To have someone lay the flames, it might be about 30-40 bucks, if that. It takes lots of time to tape up the bottle right. I would guess about $150-175 paint and labor. It might be a little more. Inside the flame, is done with 3 coats of white pearl, over the same silver which is a silver from a newer Audi A4.
12-17-2008, 08:32 AM
#6
12 Second Club
iTrader: (9)
Join Date: Jun 2006
Location: Grand Forks, North Dakota
Posts: 1,051
Likes: 0
Received 0 Likes
on
0 Posts
Is this NHRA legal for track use? I have always wondered if you can take the sticker off, or is the information stamped into the bottle that they need?
All bottles must be securely mounted, stamped with minimum DOT 1800 pound rating, and identified as nitrous oxide. Nitrous oxide bottle(s) located in the driver compartment must be equipped with a relief valve and vented outside the compartment.
Anyway, very nice!
All bottles must be securely mounted, stamped with minimum DOT 1800 pound rating, and identified as nitrous oxide. Nitrous oxide bottle(s) located in the driver compartment must be equipped with a relief valve and vented outside the compartment.
Anyway, very nice!
Trending Topics
12-17-2008, 11:11 AM
#10
12 Second Club
Thread Starter
iTrader: (16)
Join Date: Jun 2005
Location: Charlotte, NC
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys. Wow that bottle is very similar to mine! haha. The bracket is this one right here,
http://www.harrisspeedworks.com/shop...cat=268&page=1
http://www.harrisspeedworks.com/shop...cat=268&page=1
