will this work
 

plan on running a 75-125 shot

car has 3600-3800 stall and built 60e

aloso has 4.10's and 28's

Of course it will work... duh! But you might be out of gear on the top end.

I think I did some calculations awhile ago...and a 28" tire with a 4.10 gear brings the effective ratio down to a 3.89 or something...

On 26" tires with a 3.73 gear and 100 shot, I'm right at the rev limiter.

car is for 1/8th mile only and yeah 28's bring the 4.10's down to like 3.74!

so whats the question?

if the stall and gearing will be enough for the setup? and will it work well with the nitrous?

What other mods does the car have?

Check out the setup in my signature...it's running fine...

car has hooker Lts, 3' duals, mti lid,s3 t.b. and 3600-3800 stal and 4.10s

suspension have wolfe lca's and phb, spohn 1' rear sway bar and umi torque arm

Stock cam?

I'd say that you could run it through the 1/4 and still be fine. It really depends on the converter and how much it loosens up on the bottle.

with that small of a shot, i think it'll be fine. what are you willing to rev the car to?

well im going with a vindicator instead guys

time to get a real stall and drop to a 26" tall tire then

i have a real stall its a vig nitrous convertor and the 28's will be better then 26' have more sidewall

i'm talking about to take advantage of that big of a cam. That cam wants to rev you want a pt4400 type converter with a cam that big. If your going to run a 28" tire might want to step up to 4.30 with that cam

A pt4400 and nitrous don't go together. He had that converter and got rid of it to spray. I had another buddy that tried to spray at 100 shot on a pt4400 and it didn't work out to well.

he said he isnt doing spray going with a vindicator cam instead

nope i doing spray and vindicator ruckus!