Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

What Nitrous should I use?

Old Jan 16, 2009 | 10:32 PM
  #1  
The_New_Guy's Avatar
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 22
Likes: 0
From: California
Question What Nitrous should I use?

Guys I have a 2002 Camaro ss with air lid headers 3" exhaust and I wanted to know what would happen if I put it on the Bottle and how much it can take. can you guys help me out please... Thanks
Reply
Old Jan 17, 2009 | 05:20 AM
  #2  
Mike@HSW's Avatar
FormerVendor
iTrader: (6)
 
Joined: Nov 2007
Posts: 1,593
Likes: 0
From: Glenolden, PA
Default

what will happen...You will go faster!

with your mods you could spray a 150 wet shot without any problems. If the car has ever been tuned you may want to pull a few degrees of timing. Make sure you get all the supporting accessories with whatever kit you get, ie. window switch, a/f shutdown, blow down tube, bottle heater, purge kit, colder set of plugs, etc.

Let me know if you have any other questions at all.
Reply
Old Jan 17, 2009 | 10:28 AM
  #3  
Strahley's Avatar
TECH Fanatic
iTrader: (4)
 
Joined: Jan 2004
Posts: 1,126
Likes: 0
From: Manhattan, KS
Default

I would go with DynoTune or HSW...or both
Reply
Old Jan 19, 2009 | 11:41 AM
  #4  
Nitro Dave's Nitrous Outlet's Avatar
FormerVendor
iTrader: (25)
 
Joined: Jun 2002
Posts: 12,283
Likes: 4
From: Waco, TX
Default

When done properly and using good quality products you can have years of fun making great power. Your stock bottom end can safely take up to a 150 hp. I would suggest looking into one of our single nozzle or plate systems. If you need any knowledgable tech help feel free to shoot me a pm or call us on our toll free tech line and talk one on one with one of our reps. 1-866-648-7637
Dave
Reply
Old Jan 19, 2009 | 06:30 PM
  #5  
jeepers_88's Avatar
11 Second Club
iTrader: (13)
 
Joined: Dec 2008
Posts: 365
Likes: 0
From: Cape Coral, Florida
Default

I just got done installing installing my HSW wet plate kit, Im very pleased with how it came out, and the microedge controller they also sell is bad *** and I highly recommend it. The 150 shot was a lot of fun at the track, then I played with the 100 shot on the street and it just rolls the tires off from a second gear rolling start. Feel free to ask me if you have any questions about it.
Reply
Old Jan 20, 2009 | 10:59 AM
  #6  
Nick@HSW's Avatar
FormerVendor
iTrader: (4)
 
Joined: Jul 2005
Posts: 1,954
Likes: 0
From: Glenolden, PA
Default

Originally Posted by jeepers_88
I just got done installing installing my HSW wet plate kit, Im very pleased with how it came out, and the microedge controller they also sell is bad *** and I highly recommend it. The 150 shot was a lot of fun at the track, then I played with the 100 shot on the street and it just rolls the tires off from a second gear rolling start. Feel free to ask me if you have any questions about it.
I appreciate the feedback! Thanks.

Nick
Reply
Old Jan 21, 2009 | 01:37 AM
  #7  
dannyz's Avatar
TECH Fanatic
20 Year Member
 
Joined: Oct 2005
Posts: 1,131
Likes: 76
From: olympia, wash
Default

Originally Posted by Mike@HSW
what will happen...You will go faster!

with your mods you could spray a 150 wet shot without any problems. If the car has ever been tuned you may want to pull a few degrees of timing. Make sure you get all the supporting accessories with whatever kit you get, ie. window switch, a/f shutdown, blow down tube, bottle heater, purge kit, colder set of plugs, etc.

Let me know if you have any other questions at all.
Wow.
So do think with my mods I could up my system to a 125 shot with the stock fuel pump?
I have been reluctant to go beyond my 75 shot because of my stock fuel system.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:17 AM.