Somebody09

I'd post this in the FI section, but I'm quite sure they'd only recommend a pre-fabricated plastic tank, or my windshield washer reservoir.

What I'm looking for is a STAINLESS STEEL tank for holding a water/methanol mix, and a drain on the bottom. Fuse-side or battery side makes no difference, but not having to relocate the battery helps! Are any of the sponsors (Dave? HSW?) able to fabricate such a thing?

Thanks!

Robert56

iTrader: (2)

Check with Trick Performance.
Robert

DopdBrd

iTrader: (25)

I know both HSW and Nitro Dave's make a standalone that fit in both those places.

firefighting1101

iTrader: (48)

i beleive that nitrou daves can do custom orders on their stand alones. give htem a call and im sure they will get you squared away

Nitro Dave's Nitrous Outlet

iTrader: (25)

Yes we can make this for you. We are the company that designed the all in one dedicated design. We have the ability to design and build complete custome designs. Shoot me a pm or give me a call here at the shop.
Dave

Nick@HSW

iTrader: (4)

Shoot me a PM with what you're looking to do.

Nick

Ron@Vengeance

iTrader: (51)

Nitrous Outlet... Nuff said

Formula383

iTrader: (8)

Nitrous Outlet...

It's crappy pic from my iPhone but you can see what it looks like and how it fits. They also make them for the driver's side as well.

BlackScreaminMachine

iTrader: (17)

I've seen HSW's stand alone. Top notch.

Robert56

iTrader: (2)

Does NO and HSW both make SS tanks? If so, I didn't know, otherwise they would have been rec. But I do know that Trick makes the custom SS stuff.
Robert

Nitro Dave's Nitrous Outlet

iTrader: (25)

Not everything we have is listed on our site. Yes we also build SS tanks. Its not something that we build alot of compred to our standard design though.
Dave

Nick@HSW

iTrader: (4)

Yup, not off the shelf. We can also make the aluminum cells compatible. We use them to feed the fuel side of nitrous with methanol/ethanol/etc.
Nick

Robert56

iTrader: (2)

Oh yea that's right, Mike is running methanol or ethonal on his 3-stge set-up.
Robert

Somebody09

So the tanks would still be Al? What are you doing to it to make it compatible, hard anodizing? As you know, most (if not all) intercoolers are Al and I'm contemplating pre-compressor water/meth injection... I don't want my FMIC to corrode either.

Nick@HSW

iTrader: (4)

There are a few sealers and process' that can protect the aluminum. Anodizing is one of them, I don't know how the intercooler would come out though. I can ask my anodizer his thoughts if you'd like.

Nick

TrickPerformanceProducts

iTrader: (11)

Inject water meth or meth after the intercooler. Hard anodizing but alls it take is a little scratch, and the meth will corrode and eat through. Go stainless and donot look back.