Best controller with built in window switch/ timing control?
Thread Starter
Joined: Jan 2006
Posts: 634
Likes: 8
From: San Diego, CA
Best controller with built in window switch/ timing control? Well, my MSD digital WS took a **** (imagine that.) and its time for a controller. Who of the sponsors has a controller, with 1st gear lockout, WS capability, and also the ability to pull timing when the nitrous hits?
I am not biased as i own parts from Nitrous outlet, Dynotune, and a ton from HSW. Any opinions or options are welcome along with testemonials. Thanks everyone!
I am not biased as i own parts from Nitrous outlet, Dynotune, and a ton from HSW. Any opinions or options are welcome along with testemonials. Thanks everyone!
I use both the HSW interface and the HSW microedge, the interface to pull the timing and add fuel, and the microedge for the gearlockout/afr shutoff/windowswitch/pedal delay/etc. I think the microedge is one of the best things out there, especially for the price
Thread Starter
Joined: Jan 2006
Posts: 634
Likes: 8
From: San Diego, CA
Ya, i love the microedge/interface. and they look like awesome products. but are there any controllers that do it all?
What about this bad boy for the WS, gear lockout?
http://www.nitrousoutlet.com/catalog...roduct_id=2886
What about this bad boy for the WS, gear lockout?
http://www.nitrousoutlet.com/catalog...roduct_id=2886
Ya, i love the microedge/interface. and they look like awesome products. but are there any controllers that do it all?
What about this bad boy for the WS, gear lockout?
http://www.nitrousoutlet.com/catalog...roduct_id=2886
What about this bad boy for the WS, gear lockout?
http://www.nitrousoutlet.com/catalog...roduct_id=2886
Either way they both look like good options, looking as HSW's site though it looks like the ME and interface are on sale, and would be $325 together, so just a lil cheaper. That NO piece does look nice, i just know there are a lot of people on here and other boards (my self included) using the HSW combo with great results, tips, and advice.
Launching!
Joined: Jan 2004
Posts: 223
Likes: 0
From: Kings park New York
Well I'm no expert but you should do some research on what I have its called an FJO box. Its about the size of a single sparkplug box and takes care of everything windowswitch,gear lock out,progressive controller its great and you can easily change everything because it comes with an easy to download c.d. for a laptop and once downloaded you can just enter what you want then connect it to the FJO box and after about 5min all done and ready to roll. Just some food for thought good luck.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
At the moment they are out of stock. If you're dead set on it, give full throttle speed and sound a call. They might have them in stock. I think they retail around $250. If you can't find the timing tuner, the Interface and MicroEDGE package comes in a little higher than that. Let me know if you have any questions. Thanks.
Nick
Nick
I don't think there is a single box (outside of XFI) that controls everything you want. You would not be disappointed if you piggyback a MicroEdge and Interface though. Combined, it's not much more than the FJO ot Timing Tuner
Currently there is not a box that offers it all. I would look for a controller that does not use the Iat for timming controll. At this time the lingerfelter is my favorite option.
Dave
Dave
