Huge Moving Sale!! 1 week only!!
Guest
Posts: n/a
Will these work with a Nano setup or will I need a different valve?
5. Nitrous Outlet 15lb Bottle's- Nitrous Outlet bottles are black with a high flow valve and dual accessory ports.
ONLY 159.00
http://www.nitrousoutlet.com/catalog...roduct_id=2875
5. Nitrous Outlet 15lb Bottle's- Nitrous Outlet bottles are black with a high flow valve and dual accessory ports.
ONLY 159.00
http://www.nitrousoutlet.com/catalog...roduct_id=2875
You will have to get the NX valve seperate in order to use the Nano.
-Chris
Is there anyway, we could work a deal on putting together a kit for my lt1... I am wanting a wet 150-200hp kit, dual nozzle or single, whichever would work best, purge, blow down, main line, pretty much a ready to run setup, minus the WOT switch and window swithch.I understand not all of it would be on sale, but seeing what we could do for a price.
Is there anyway, we could work a deal on putting together a kit for my lt1... I am wanting a wet 150-200hp kit, dual nozzle or single, whichever would work best, purge, blow down, main line, pretty much a ready to run setup, minus the WOT switch and window swithch.I understand not all of it would be on sale, but seeing what we could do for a price.
Yeah a LT1 plate kit would be nice.
I just purchased a NOS plate system for an F-body for a great price. and i was looking at your purge and bottle heater and it says its designed to work with number -4 AN line. i was just wondering if it will work with this kit or does it have a bigger line size.
I need to know what size lines I need to go from my pressure gauge to my bottles? I ordered some from you Dave -4an and I hope they work. I also want to get two 860-010121 6-AN (11/16 Hex) but I want to make sure that they will work with the lines. It says 6-AN so I am confused.
Chris, I am the one that emailed you. I was a bit confused in the email you wrote back because you said it is -3 going from the gauge to the bottle, but then going from the bottle to the nitrous solenoid is -4? Basically going from the Main line to a splitter, that is a -8an right? Then from the splitter it goes to the two bottles. I am wondering if those are -3 or -4.
Basically going out from the bottles what size hose is that?
Chris, I am the one that emailed you. I was a bit confused in the email you wrote back because you said it is -3 going from the gauge to the bottle, but then going from the bottle to the nitrous solenoid is -4? Basically going from the Main line to a splitter, that is a -8an right? Then from the splitter it goes to the two bottles. I am wondering if those are -3 or -4.
Basically going out from the bottles what size hose is that?
I also need the jet chart. I have the NX Dodge Viper Dual Nozzle PN:20325. I have some jets but know I am missing some. I would like to know what jets I need to complete all the way from 50hp to 200hp in the smallest increments possible. Thank you. PS. more than what come with the standard kit.
Thread Starter
LS1TECH Sponsor
Joined: Feb 2008
Posts: 247
Likes: 0
From: Waco, Tx
Most Plate and Single Nozzle Systems are 4AN so our heater and purge should work with your system. Usually only direct ports have 6AN main feed line.
I need to know what size lines I need to go from my pressure gauge to my bottles? I ordered some from you Dave -4an and I hope they work. I also want to get two 860-010121 6-AN (11/16 Hex) but I want to make sure that they will work with the lines. It says 6-AN so I am confused.
Chris, I am the one that emailed you. I was a bit confused in the email you wrote back because you said it is -3 going from the gauge to the bottle, but then going from the bottle to the nitrous solenoid is -4? Basically going from the Main line to a splitter, that is a -8an right? Then from the splitter it goes to the two bottles. I am wondering if those are -3 or -4.
Basically going out from the bottles what size hose is that?
Chris, I am the one that emailed you. I was a bit confused in the email you wrote back because you said it is -3 going from the gauge to the bottle, but then going from the bottle to the nitrous solenoid is -4? Basically going from the Main line to a splitter, that is a -8an right? Then from the splitter it goes to the two bottles. I am wondering if those are -3 or -4.
Basically going out from the bottles what size hose is that?
Give me a call. I am a bit confused as well.lol I can ask you some questions and figure out exactly what you need.
Dave
If you have a sale on the Dual Stage Plate systems I will buy one today!! Along with some other small things.
Sorry I made a mistake in my wording. I am pretty sure they are 4-an lines and that is what I ordered last week. 2x12". Did those ship out Dave?? I have a splitter that goes from the main line to the two bottles. What size are the lines that go from the splitter to the bottles? The pressure gauge sits on top of the splitter getting pressure from both bottles. So I meant to say what are the size lines going from the splitter to the bottles. I am sure they are a standard size right? Is that standard size 4-an? I did not do the original install and the lines do not have a size stamped on them. I just hope the ones I ordered fit. If I get them in the mail and they do fit, that of course answers that question and i will be able to order the 860 HEX to wing adapters as I will know what sizes they are.