New noids?
Thread Starter
10 Second Club
Joined: Aug 2006
Posts: 287
Likes: 0
From: Dayton Ohio
New noids? I have been debating weither to replace my HSW noids or not. they are a year old and work fine but the first time i set up my system the purge solenoid engaged and would not close.
Should i be safe and replace them , and if so with which brand?
I am spraying 150 wet and maybe run a bottle through it a month.
Should i be safe and replace them , and if so with which brand?
I am spraying 150 wet and maybe run a bottle through it a month.
I would just check them and make sure they are both still firing good and strong. If you have the small base solenoids the size of your thumb and you just want the assurance of a better solenoid the Larger Higher flowing Nitrous Outlet Solenoids are hard to beat.
They will take more abuse, flow alot more, and open under pressure when some of the smaller base solenoids will not.
Dave
They will take more abuse, flow alot more, and open under pressure when some of the smaller base solenoids will not.
Dave
Sounds like they have treated you well thus far. Was there a wiring issue with the purge when you originally set it up? If you would like, you can send us your noids and we will take them apart and inspect them. Its always a good idea to rebuild your solenoids every so often. I am not sure which ones you have, but you can always upgrade to our large solenoids if you like.
Thread Starter
10 Second Club
Joined: Aug 2006
Posts: 287
Likes: 0
From: Dayton Ohio
Sounds like they have treated you well thus far. Was there a wiring issue with the purge when you originally set it up? If you would like, you can send us your noids and we will take them apart and inspect them. Its always a good idea to rebuild your solenoids every so often. I am not sure which ones you have, but you can always upgrade to our large solenoids if you like.
