Blow down tube install question
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Blow down tube install question
Hey guys nitrous newbie here and what I can only guess will be a dumb question. I have a Zex bottle from kit 82026 and the blowdown kit 82099. My only question is that there is a lil bronze/ copper colored disc in the kit and of course no instructions. Does that go between the valve and the bottle ? It wont fit unless I trim it down, do I even have to use it at all? Thanks for the help guys!
#4
FormerVendor
iTrader: (4)
Join Date: Jul 2005
Location: Glenolden, PA
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
Just for anyone searching, yes the rupture disc goes between the bottle valve and the exhaust fitting. Don't swap the fittings if there is pressure in the bottle and don't over tighten the fitting as it could distort the rupture disc.
Nick
Nick