PONTIAC SLP

iTrader: (3)

hi , i ordered two jets . Nitrous .073 , Fuel .040 , i would to know are those jets for 200RWHP ?

i forget to say my system is from DynoTune single wet nozzle

02 BLK WS6

iTrader: (11)

Seems more like a 150-175 nitrous jet. The fuel jet seems on the large side for a high pressure system.

PONTIAC SLP

iTrader: (3)

okay so how much jets for 200RWHP ???

how about this chart , do u guys believe it ?

HP-- Single N2O--Dual N2O--Single Fuel
25 .024
30 .026
35 .028 .020
50 .037 .024 .020
75 .042 .028 .022
100 .047 .032 .025
125 .055 .038 .029
150 .063 .044 .034
175 .070 .052 .038
200 .082 .047 .044
250 .093 .055 .050

i calculated at this site http://www.robietherobot.com/NitrousJetCalculator.htm N 73 and it says : The Fuel jet size should be 0.041" or 1.033mm

A Nitrous jet size of .073" or 1.8542mm should produce:
240.66 HP with 1 port(s)



Actual HP to the wheels: 204.56 HP

Chris@NitroDaves

I would call Dynotune and get the jetting form them and to see if the kit will support 200hp. Also if you dont have a SHO hose on the nitrous side you wont get anything over 175hp out of the kit.

-Chris

PONTIAC SLP

iTrader: (3)

the system is up to 250HP , i'll talk with them , thanks Chris