Selectable Dual Bottle Setup
Selectable Dual Bottle Setup I've done a lot of searching, but the only dual bottle setups i've seen use both bottles at the same time, as one circuit. Is anyone here running 2 bottles Y'd together, but switching between the two bottles so that only one is used at a time? I would like to do this so that I can keep both bottles useable, but then show someone when I "unhook my bottle"
... meaning the feed line would be open once it is unscrewed from the unhooked bottle, thus making an open path for the N2O to go when the hidden bottle is opened via remote bottle opener. Does someone offer a checkvalve I can put in line to avoid the need to plug the open end? Any other ideas on this?
... meaning the feed line would be open once it is unscrewed from the unhooked bottle, thus making an open path for the N2O to go when the hidden bottle is opened via remote bottle opener. Does someone offer a checkvalve I can put in line to avoid the need to plug the open end? Any other ideas on this? 
If you never intend to actually use the exposed bottle, just run the line under the carpet and have it capped. That way, when you unhook it, it will have pressure in it and look real. Have your real bottle hidden on a remote opener, or ball valve, or a small bottle hidden.
LS1TECH Sponsor
Joined: Feb 2008
Posts: 247
Likes: 0
From: Waco, Tx
Niiiiice!
watch out for this guy
You guys should see the **** we come up with. I got a buddy with a kit on an impala so hidden he'll let anyone take **** apart and try and find it. Funny thing is, no one has any reason to suspect him of spraying anyway, but he's good at hiding it.
My tips are things I've seen along the way, can't take credit for alot of them.
Its hard to hide a whole system, so I've found its easier to hide "part" of the system. Let everyone know you have a kit, but make easy to "disable" or disconnect, even if you're faking it. Just be careful, some grudge guys get really pissed if they suspect you sprayed them anyway. If you're gonna hide it, spray small. Its pretty obvious when you hit a car with 150-200 shot.
My tips are things I've seen along the way, can't take credit for alot of them.
Its hard to hide a whole system, so I've found its easier to hide "part" of the system. Let everyone know you have a kit, but make easy to "disable" or disconnect, even if you're faking it. Just be careful, some grudge guys get really pissed if they suspect you sprayed them anyway. If you're gonna hide it, spray small. Its pretty obvious when you hit a car with 150-200 shot.
And I agree about the completely hidden system... that's difficult. Letting everyone know you have spray and then making it appear to be non-functional is usually easier, and lets the other guy "know" you're not spraying.
