Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

delay ?

Thread Tools
 
Search this Thread
 
Old Aug 14, 2009 | 03:21 PM
  #1  
subhumanzz's Avatar
Thread Starter
9 Second Club
iTrader: (46)
 
Joined: May 2006
Posts: 1,037
Likes: 0
From: Fredericksburg, VA
Default delay ?

hitting the track this sunday and was curious what you guys think will be a good starting point for the delay off of the line? i want it to come in after the clutch is fully engaged. i was thinking that i would start out with a full second. any thoughts?
Reply
Old Aug 14, 2009 | 04:04 PM
  #2  
Chris@NitroDaves
Guest
 
Posts: n/a
Default

1 to 1.5 sec should be ok....

It will all depend if you are slipping the clutch or straight dumping it.

-Chris
Reply
Old Aug 14, 2009 | 04:26 PM
  #3  
OutlawZ's Avatar
9 Second Club
iTrader: (4)
 
Joined: Dec 2004
Posts: 2,607
Likes: 0
From: Cali
Default

1.5 is usually a good starting point...
Reply
Old Aug 14, 2009 | 04:41 PM
  #4  
subhumanzz's Avatar
Thread Starter
9 Second Club
iTrader: (46)
 
Joined: May 2006
Posts: 1,037
Likes: 0
From: Fredericksburg, VA
Default

no slipping here. 5.5 - 6k and drop it.
Reply
Old Aug 15, 2009 | 12:11 AM
  #5  
Robert56's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2003
Posts: 9,557
Likes: 1
From: Tacoma, WA
Default

1.5, hell you will be out of 1st gear by then. the point will be to add as much as you can as soon as you can before shifting to second. If you must have a delay, it would be under a 1/2 second. the above advice must be from auto drivers, lol. i dump mine basically also and even if spinning thru the entire 1st gear will still 60 better than no spray.
Robert
Reply
Old Aug 17, 2009 | 03:18 PM
  #6  
subhumanzz's Avatar
Thread Starter
9 Second Club
iTrader: (46)
 
Joined: May 2006
Posts: 1,037
Likes: 0
From: Fredericksburg, VA
Default

yeah i ended up running it out of the hole with no delay. unfortunately the track was very hot! i couldnt even launch the car on the motor.
Reply




All times are GMT -5. The time now is 04:31 AM.