so the question is how much power have you made using eagle 6.125 rods??did u upgrade the bolts to ARP2000 or L19's??the people over at eagle say 1000rwhp is no problem with the ARP2000's...i have had a set over 700rwhp thru an auto with no problems on a 250 shot..

 

SMITH has Eagle rods in his motor, his car has been 5.07 @ 139 I'd say it is safe to say that he is past the 1000rwhp mark.

 

i ran eagles in my car for a couple years at 650-700 rwhp

i still run there crank now and its 5 years old and been through a couple blocks. lol
my buddy ran them in his stang as well he was running mid 8's on spray for years with no issue

 

I'm using the Eagle 4340 Crank (Eagle says 1000hp) and the H-Beam forged rods (Eagle says 750hp). I'm going to be using a 300hp shot and should be around the 900hp marker. After seeing the comments above it's safe to say these rods will be ok? I would only be using the nitrous a few times a year at most...