Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

rpm signal

Thread Tools
 
Search this Thread
 
Old 03-22-2010, 06:59 PM
  #1  
Teching In
Thread Starter
 
trembles's Avatar
 
Join Date: Dec 2005
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts

Default rpm signal

what wire do I tap into for rpm signal on a 2010 camaro ls3 for an fjo controller?
Old 03-23-2010, 04:14 PM
  #2  
Chris@NitroDaves
Guest
 
Posts: n/a
Default

1. Passenger side main coil pac plug ( where they all coverge into one connector....should be a white connector )

2. Top row of wires ( row closest to you looking over into the engine bay )

3. Second wire from the left ( i've seen it a light green wire or green w/ white tracer or a turqouise color )
Old 03-23-2010, 05:24 PM
  #3  
Teching In
Thread Starter
 
trembles's Avatar
 
Join Date: Dec 2005
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts

Default

thanks chris
Old 03-24-2010, 04:56 PM
  #4  
Chris@NitroDaves
Guest
 
Posts: n/a
Default

Your Welcome




All times are GMT -5. The time now is 03:31 AM.