ok about to buy a controller to only pull timing when i want to run n20...

i has my n20 setup on 75 shot right now...

question.. how much timing do i need to pull or does it do it automatically?

and is a tr6 plug ok?

tia

 

TR6 is fine for a 75shot not much more though as your only gonna be able to take out like 3* timing with the controller, max.

 

cause you can see mods in sig.. its got a big cam... i shift at 7200.. so i was thinking just 75 shot... i read you dont even need to pull timing for 75 shot? just higher octane and a good plug?... should i just get br7ef's while im at it?

 

br6 would be ok for the cam and 75shot. Id go with a br7 if you plan on uping the shot...

 

^^^yup br6 your DCR is much lower with the big cam. if it were me i would say you'd be good with that up to 125shot if your down <21* timing. again check the back plugs.

 

so will br7's hurt it? if i just run those on 75 shot?.... and i should just get a hsw interface controller hooked to me arming switch