Routing nitrous line

Reply Subscribe

Thread Tools

Search this Thread

Jun 11, 2010 | 08:32 AM

supersick99z

Thread Starter

TECH Resident

iTrader: (66)

Joined: Oct 2008

Posts: 793

Likes: 0

From: NC

Routing nitrous line

Anyone running a -4an line from a tunnel mount bottle to a pillar gauge? If so how did you route it?

Jun 11, 2010 | 11:22 AM

supersick99z

Thread Starter

TECH Resident

iTrader: (66)

Joined: Oct 2008

Posts: 793

Likes: 0

From: NC

Nobody??

Jun 11, 2010 | 12:06 PM

01 ss vert

TECH Resident

iTrader: (1)

Joined: Mar 2009

Posts: 818

Likes: 0

From: Knoxville, TN

For bottle pressure guage? my guage has a sensor in line at the valve; so no nitrous goes to the pillar, just the sending unit wiring. Nitrous goes straight from the valve to the noids.

Jun 11, 2010 | 12:28 PM

supersick99z

Thread Starter

TECH Resident

iTrader: (66)

Joined: Oct 2008

Posts: 793

Likes: 0

From: NC

It's a mechanical pillar gauge so the line goes from the bottle to the gauge in the pillar

Last edited by supersick99z; Jun 11, 2010 at 12:51 PM.

Jun 11, 2010 | 03:07 PM

Chris@NitroDaves

Guest

Posts: n/a

I would take the center console out and route it through there up into the dash going to the pillar.

Jun 14, 2010 | 09:53 AM

Nick@HSW

FormerVendor

iTrader: (4)

Joined: Jul 2005

Posts: 1,954

Likes: 0

From: Glenolden, PA

You can also run it along the door sill plate. Just use caution so you don't run the screw into the line when putting the plastic plate back on.

Nick

Jun 14, 2010 | 01:29 PM

Chris@NitroDaves

Guest

Posts: n/a

Quote:

Originally Posted by Nick@HSW

You can also run it along the door sill plate. Just use caution so you don't run the screw into the line when putting the plastic plate back on.

Nick

What he said. We have had customers screw through the line putting the plastic sill back on.

Reply Subscribe