Done and done!
Thread Starter
Launching!
Joined: Dec 2005
Posts: 213
Likes: 0
From: The Midwest
Done and done! The LAST thing i wanted to do, was more power, cheaply... I installed a n2o kit about 2 months ago, full 15# 4500psi NANO kit, TNT/Nitrous Outlet solenoids, Nitrous Outlet Plate kit.
Pics of the kit installed:
Finally got around to tuning and spraying my car. This is on a 150 shot. Keep in mind this is thru an auto with a 3200 stall, cutouts closed, the converter was NOT locked. The n2o pull was the 6th pull so the motor was a lil bit heat soaked as well. First pull was on motor, second on spray. I have cutouts and those make about a 21rwhp/12rwtq gain over closed, but the purpose of my dyno was for afr readings, not numbers. The car pulls like a raped ape, it is an amazing feeling. I ran 10.51 @ 134 at the strip on motor..im hoping to hit 9's now.
Pics of the kit installed:
Finally got around to tuning and spraying my car. This is on a 150 shot. Keep in mind this is thru an auto with a 3200 stall, cutouts closed, the converter was NOT locked. The n2o pull was the 6th pull so the motor was a lil bit heat soaked as well. First pull was on motor, second on spray. I have cutouts and those make about a 21rwhp/12rwtq gain over closed, but the purpose of my dyno was for afr readings, not numbers. The car pulls like a raped ape, it is an amazing feeling. I ran 10.51 @ 134 at the strip on motor..im hoping to hit 9's now.
Thread Starter
Launching!
Joined: Dec 2005
Posts: 213
Likes: 0
From: The Midwest
Thanks for the comments guys, appreciate it!
Pics are here!
https://ls1tech.com/forums/multimedi...-quickies.html
Pics are here!
https://ls1tech.com/forums/multimedi...-quickies.html
