Is this bs.
10-05-2010, 09:08 PM
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Nov 2007
Location: va
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Is this bs. Typhoon Turbine
--------------------------------------------------------------------------------
$279.99
SKU: 150001
The Typhoon turbine makes ordinary nitrous systems, extra-ordinary. It takes your nitrous system and kicks it into overdrive with boosts in horsepower and torque!
The Typhoon is a very efficient way to improve the delivery of Nitrous into the intake system. This unique design utilizes the high pressure released during nitrous activation to drive the turbine and create positive force in much the same way that a turbo uses the exhaust force to drive the turbo. The result is an improved spray pattern along with a mild boost force that greatly improves the horsepower and torque efficiency over typical EFI single nozzle systems.
When the N2O is not in use, the “Passive Mode” allows passing air to spin the turbine freely to create swirl effect of air entering the throttle body for improved air flow.
Unique design utilizes high pressure nitrous or pressurized air to drive the turbine to create positive induction force.
Implements a directional injection nozzle that can be angled to control the speed.
Injection nozzle uses different size orifice jets to control the flow rate of the force media.
Has ability to utilize a Y mixer nozzle to introduce both the force media (air/n2o) and a catalyst media such as fuel, alcohol or methanol.
Passive mode allows passing air to spin turbine fan freely to create swirl effect of air entering the throttle body for improved air flow.
Improves horsepower effi ciency of existing single nozzle nitrous injection system by as much as 15% and increases torque numbers up to 20% or more.
Installs easily within minutes to any aftermarket cold air pipe system.
http://www.designengineering.com/cat...yphoon-turbine
--------------------------------------------------------------------------------
$279.99
SKU: 150001
The Typhoon turbine makes ordinary nitrous systems, extra-ordinary. It takes your nitrous system and kicks it into overdrive with boosts in horsepower and torque!
The Typhoon is a very efficient way to improve the delivery of Nitrous into the intake system. This unique design utilizes the high pressure released during nitrous activation to drive the turbine and create positive force in much the same way that a turbo uses the exhaust force to drive the turbo. The result is an improved spray pattern along with a mild boost force that greatly improves the horsepower and torque efficiency over typical EFI single nozzle systems.
When the N2O is not in use, the “Passive Mode” allows passing air to spin the turbine freely to create swirl effect of air entering the throttle body for improved air flow.
Unique design utilizes high pressure nitrous or pressurized air to drive the turbine to create positive induction force.
Implements a directional injection nozzle that can be angled to control the speed.
Injection nozzle uses different size orifice jets to control the flow rate of the force media.
Has ability to utilize a Y mixer nozzle to introduce both the force media (air/n2o) and a catalyst media such as fuel, alcohol or methanol.
Passive mode allows passing air to spin turbine fan freely to create swirl effect of air entering the throttle body for improved air flow.
Improves horsepower effi ciency of existing single nozzle nitrous injection system by as much as 15% and increases torque numbers up to 20% or more.
Installs easily within minutes to any aftermarket cold air pipe system.
http://www.designengineering.com/cat...yphoon-turbine
10-05-2010, 09:43 PM
#5
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Nov 2007
Location: va
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
was not looking for a kit have a nos wet kit with a harris speed controler micro edge. love but i was just looking at a d on adrl/us and was likewtf does it actully help how.
10-05-2010, 09:54 PM
#6
Staging Lane
Join Date: Sep 2010
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
hmmmm It would really suck if one of those fins came loose and shot in the intake !
Nozzle and feed lines are not included
and lol pretty expensive for a air spinner that looks like it made from a beer can
Nozzle and feed lines are not included
and lol pretty expensive for a air spinner that looks like it made from a beer can
Trending Topics
10-06-2010, 07:39 AM
#11
TECH Resident
iTrader: (40)
Join Date: Jul 2004
Location: marion nc 28752
Posts: 911
Likes: 0
Received 0 Likes
on
0 Posts
As bad as I hate to say it I wish I would have thought of that stupid tornado. It made that Guy
a very rich man. I guess he is laughing all the way to the bank.
a very rich man. I guess he is laughing all the way to the bank.
10-06-2010, 09:35 PM
#17
WOW!!!!!!!!!!!!!!!!!!!!!!!!!
Motors are going to direct injection so no fuel left in the intake runner. Yet some idiot designs a fan blade for your nirous and fuel to accumulate on that makes your nitrous kit work like a turbo!
Motors are going to direct injection so no fuel left in the intake runner. Yet some idiot designs a fan blade for your nirous and fuel to accumulate on that makes your nitrous kit work like a turbo!
