I got a dry shot kit off a member on here. Just wondering what i can do to make sure its in 100% running order, he said the solenoids are in good condition still and havent been used but 3 or so times it was on the car, and i believe him but still want to make sure nothing has changed and its all good to go! System is n.o.s except for the nitrous outlet bottle: dry shot kit, window switch, pills, jets, solenoids, purge, bottle heater, pressure gauge, hobbs switch, switches and wiring, lines, mounting brackets..

If i know what my potential problems will be and what i can do to make sure everything will be oporating smooth, or at least some stuff i can do to check or look for, that would be awesome. Thanks in advance!

 

Help me out guys

 

you should be able to hook them up and test them with some nitrous to it and if it works fine you are good. How old are the noids?

 

Not sure exactly, but I was meaning testing it before it's going on the car/hooked up to it

 

i would take apart the noid n see if there is any garbage in there. just to make sure its clean

 

Yeah pretty much all ive done is looked over it all, examined the condition of the threads, inside of lines, valves, jets, ect. Nothing really stands out, looks pretty clean. Take apart the solinoid?

 

Here are some pictures of what i was looking at tonight. The third solinoid doesnt have a nut on the end of it and is dented on the side and has a gap where it sits. The inside doesnt appear very clean either

 

Anyone?

 

Unless your getting a screaming deal I'd look into something like Nitrous Outlets Brand X stuff. Low point of entry cost and great quality stuff. Those pictures look "ok" but buying used **** can burn you in the end, especially if a noid fails.

 

I did get a really good deal on this setup, and I already bought it. Just wanted to make sure that it looks ok, I haven't been in the game long enough to know. Thanks for the replys guys! Anyone else?

 

That dent and missing bolt has kinda got me worried..I dont really understand what thats all about.

 

Ill give you my honest opinion, those look like . I wouldn't run those, they look rusted to ****. Invest in some new products especially dealing with nitrous.

 

Hook em up to the kitchen sink and have them squirt water randomly at passer-bys.

 

LMAO hahaha, Buddy I would trash those also you can get noids for 60 or 70 bucks

 

Yea those noids look like they are 10 years old and have been used. Its just not worth the risk.

 

Yeah I'm a little scetched out, the guy said they were fine and used 2 or 3 times and in good shape. I'm gunna see if he'll take them back

 

I don't think I've seen a kit in that bad of condition before. I wouldn't use it on my lawnmower... Get your money back if you can. Yeah it was used 2-3 times... Every day for 10 years...

 

You should get rid of that crap and buy my kit instead

 

What is going on with the way its plumbed? Why does he have two n20 noids back to back?

 

IWGF: Haha i saw your kit, pretty damn nice but outta my $

Single supra, no idea, havent even had enough time to mess with it at all