Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

High compression Nitrous question.

Thread Tools
 
Search this Thread
 
Old Feb 14, 2004 | 12:48 PM
  #1  
chetyg's Avatar
Thread Starter
On The Tree
 
Joined: May 2003
Posts: 150
Likes: 0
Default High compression Nitrous question.

Hi guys I am fixing to add a 100 shot on my heads/cam/longtubes car. compression is 11:5:1 i was wondering if I pull 5 degrees of timing and run 100 octane is this gonna be ok? I will also richen the a/f a little. I will be running a TNT F1 kit.
thanks guys
chet
Reply
Old Feb 14, 2004 | 12:58 PM
  #2  
SDB's Avatar
SDB
10 Second Club
iTrader: (7)
 
Joined: Mar 2003
Posts: 2,327
Likes: 2
Default

I doubt you will need any timing retard, much less 5 degrees..especially with 100 octane. Should be able to run 100 hp wet shot on 11.5 cr with 94 octane and no timing retard. If you richen up the AF, use 100 octane, and take 5 degrees out, you wont be using the full power of the 100 hp shot, probably loose 20+ rwhp doing all that stuff.
Reply
Old Feb 14, 2004 | 01:37 PM
  #3  
z28mccrory's Avatar
TECH Resident
iTrader: (7)
 
Joined: Jul 2003
Posts: 756
Likes: 1
From: Southern Indiana
Default

On my H/C car, we pulled roughly 4 degrees of timing out and i sprayed 125 all summer. I always got some good gas to mix in with my 94 though (maybe 5 gallons or so of 100+ to mix in) and it worked great.
Reply




All times are GMT -5. The time now is 02:44 PM.