Cam and Nitrous, will this work???
Thread Starter
Teching In
Joined: Jan 2004
Posts: 39
Likes: 0
From: Knightstown, IN
Cam and Nitrous, will this work??? I'm about to install a tr224-112lsa pakge in my 00 Z28/M6 this weekend and I had a buddy tell me tonight that he might sell me his kit(150 shot) that he has for his 98 ta/A4(wrecked his car) and I was wondering if I would be able to do that with that cam? Could I do that safely without hurting anything or blowing it up?
Launching!
Joined: Feb 2002
Posts: 211
Likes: 0
From: Stillwater, OK
ttt
i would like to know too, i have the same cam TR224 on 112 LSA, and was thinking of going with a nitrous kit (maybe a TNT F1), so would this cam work well with n2o or do i need a split cam on a 114 LSA?
i would like to know too, i have the same cam TR224 on 112 LSA, and was thinking of going with a nitrous kit (maybe a TNT F1), so would this cam work well with n2o or do i need a split cam on a 114 LSA?
Teching In
Joined: Jan 2004
Posts: 4
Likes: 0
TNT F1 kits are big they are rated at the rear wheels and that is a understatement I made 160 RWHP and 300 RWTQ on a TNT 100 shot. However this is usally not the case but the stock cam is a pretty good N20 cam, and mine was a freak. About the split cam that is really not needed until you are shooting a big shot and your bottom end cant handle a real big shot. So unless you are doing a rebuild in the future just go with a good na cam and if the exaust duration is larger than that good for N20 but it is not quite needed for a 150 shot.
Hope this helps,
Earl
Hope this helps,
Earl
