MSD 2 Step with N20
06-21-2011, 10:18 AM
#1
10 Second Club
Thread Starter
iTrader: (35)
Join Date: Aug 2005
Location: paducah, ky
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
MSD 2 Step with N20 Guys I have a m6 car, Already have a kit installed, Im just looking for a basic way to tie into the kit with the msd 8733 2 step so that the kit doesnt activate until the 2 step deactivates...
06-21-2011, 10:43 AM
#2
Teching In
iTrader: (5)
Join Date: Apr 2009
Location: Hoffman Estates
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
im also getting a 2-step..and i plan on locking out 1st gear with my window switch. i think that'll solve the issue,if im mistaken someone please correct me haha
what wiindow switch are you running?
what wiindow switch are you running?
06-21-2011, 12:07 PM
#3
10 Second Club
Thread Starter
iTrader: (35)
Join Date: Aug 2005
Location: paducah, ky
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Gotcha, I really planned on hitting the car out of the whole with the kit, or planned on setting the car up that way.... But Im running the Micro edge!
06-21-2011, 07:04 PM
#4
11 Second Club
iTrader: (5)
Join Date: Aug 2004
Location: Coatesville, PA
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
I have the MSD 2-step and my window switch has 1st gear locked out. It works for me like that....you can add a relay that could disconnect the nitrous system if you have the clutch depressed. So when you depress the clutch and floor it all that is activated is the 2-step as soon as you lift the clutch the nitrous activates.
