forced induction cam and nitrous?

Reply Subscribe

Thread Tools

Search this Thread

Jul 8, 2011 | 01:22 PM

whitedevil

Thread Starter

Launching!

iTrader: (9)

Joined: Nov 2005

Posts: 299

Likes: 0

From: Arizona

forced induction cam and nitrous?

motor is a TSP 408ci. Callies crank, compstar rods, diamond pistons, prc heads, motor is 9.5:1

originally intended for boost, but plans have changed, and the car will be getting a very nice n20 setup instead. Current cam is 232/240, .595/.609, 115LSA, 112ICL.

I have been trying to dig up info on how far i can go with this cam and how efficient and safe my setup will be with the new route, but to no avail. I intend on hitting it with 150+ shot on a weekend basis, if not more for at least another season before perusing what seems like the endless goal of forced induction again.

I would like every ones thoughts on utilizing nitrous as my power adder of choice with this cam... or should I change cams in the near future/right now.

thanks a million

Jul 8, 2011 | 02:45 PM

Graham@NitrousOutlet

Guest

Posts: n/a

I think I spoke with you the other day no?

That cam should work very well, all tho the cam specs are not very critical on this size shots. Time to put the jet too it.

Jul 9, 2011 | 01:02 AM