Hey guys I am looking for a very particular type of video ... and I was wondering if I could get some help. I am looking in to getting a plate kit for my LT1 and I see tons of videos of carb style plate kits being tested and showing flow patterns.

NOW .... I know the LS1 and LT1 are different motors and that the LT1 has 2 holes and the LS1 has 1 bigger one but, I cant seem to find any videos on the type of plates that our cars run. Yes I am looking for a LT1 video but I cant find and videos for either motor.

If at all possible I was hoping some one could post a video of a plate for a LT1 spraying and showing the pattern ... maybe even through the intake manifold if someone has one. I don't think I will get any response from regular members but maybe a person from one of the sponsors/ dealers on here?

 

http://www.youtube.com/watch?v=F_fwmx1JcE8

 

that is the only one i was able to find ... gregbob do you run that plate?

it looks like only cylinders 1 & 2 really get the hit

 

There is not a better plate out there. We tell every customer to read the plugs when tuning nitrous. That is what really tell's the story of distribution.

That plate is about as good as you can get before you go to a direct port. How much are you looking at spraying?

 

I want to start at 75 till I understand and get the feel of it.
then move up to 100-125. wet shots of course



maybe just maybe 150 at the track if i get it tuned and buy some better parts long down the road to take the bigger shot.

 

Less than 150hp is not difficult to distribute right with a proper plate design. You will not have any problems with the plate at those power levels.

 

is that the same plate as in this kit?

http://www.nitrousoutlet.com/catalog...searchResult=4

and what is the difference in this kit

http://www.nitrousoutlet.com/catalog...earchResult=17

 

Yes sir.

The difference is the first is our "vehicle specific" It comes with pre bent lines and a solenoid bracket. Looks like this when installed:



The other is more universal and comes with braided lines. This is more along the lines of what most companys offer.

 

is that kyles old set up?

 

Yes sir it is. It was nice talking with and I look forward to you stopping by.

 

i notice that kyles kit has 3 noids ... is the middle the purge?

 

Yes sir.