Solenoids to plate line
Thread Starter
10 Second Club
iTrader: (27)
Joined: Feb 2008
Posts: 2,182
Likes: 2
From: Pensacola, FL
Solenoids to plate line I need some help I am trying to plum the Nitrous outlet solenoids to the 102mm plate. Kicker is the FUEL solenoid is on the passenger side of the car, and the Nitrous solenoid is on the driver. So the hardline kit that Nitrous Outlet will not work.
I was going to use the Russell Pro Classic hose like the rest of the engine bay, BUT the hose I just read was only rated to 350psi. So that will not work. What other alternatives are there that are "black" in color or "stainless" to plum from the solenoid to the plate.
I was going to use the Russell Pro Classic hose like the rest of the engine bay, BUT the hose I just read was only rated to 350psi. So that will not work. What other alternatives are there that are "black" in color or "stainless" to plum from the solenoid to the plate.
Not sure if Im allowed to link but something like this....
http://www.yellowbullet.com/forum/sh...103672&page=29
http://www.yellowbullet.com/forum/sh...103672&page=29
