ok here's where im at right now,m6 z28 about 150 pounds of weight reduction 12;1 383 ls1 ported tf 215's and ported fast 90. it is currently running mid 11's @ 125, what do you guys think it will do with a stand alone c16, and 200 shot through a plate setup, im guessing high 10 @ 135-138ish? all opinions welcome

 

trap speed would sound about right 138-140ish but it should go high 9's low tens providing you can drive and get the car to work!

 

Should have no issues getting into the 9s but with that being said ya don't see to many m6 cars getting there lol. How built is the t 56?

That setup has the power for 9s but I see ya in the mid to low 10s. Do you have any previous time slips

 

yeah the cars just being built for the street maybe one track pass a year to see where it stands mainly to see what it traps, currently has a new monster stage 4 clutch 70k mile t56 out of a ws6 and a 10 bolt with 4.10s... it is not setup for the track but i drive it everybody and tear up the streets on the weekends

 

I would be surprised to see you get more than 2-3 passes out of that 10 bolt if it 60 fts much better than 1.80, especially with those 4.10 gears. Need to put an S60 under it and with suspension mods it should go low 10's easy and if you can drive the hell out of it 9's

 

IMO with a 200 shot you don't need 4.10's , if you do get a 9in., think about 3.90's or 3.73's

 

yeah my 60's are ****, i run nitto 55r 315's and don't do a burn out and somewhat feather it out of the whole i usually get 1.9's doin that im sure if i had a rear end and a set of slicks i could drop close .5 off my times