How much have you hit your MS4 with?
#1
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Mar 2009
Location: Bonne Terre, MO
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
How much have you hit your MS4 with?
Looking to turn my kit up this yr, and just wanting to hear how much juice has been fed to this cam. I know that there are better cams for the jug, and custom is the way to go, but this is what I have at the moment, and I want to max out my current set up. Don't want a pissing match here, just wondering how you have done with this cam.
#2
TECH Enthusiast
iTrader: (1)
I would say you should be good up to 200 -225. The MS4 only has a 3 degree split on intake/ exhaust duration @.050 so you may see no improvement over that size shot. That is one reason the MS3 works so well on spray is it has 5 degrees split in duration. The extra exhaust duration helps get all of the extra gases out quicker. The 2 quickest cam only stock bottom end cars both run TSP cams. One runs MS3 (CamsCam02) and can't remember which one Carter01 runs. Either the TorquerV3 or the 233/239 cam from TSP.