what the topic says....

Chris

 

Yes, I know a couple people that do. I think its a -8 line. Im not sure though.

 

I do. -8 AN is what you need. then just install a bulkhead fitting in the floor and thread the other end of the hose to it <img src="gr_stretch.gif" border="0">

 

kick *** guys, thanks!

Chris

 

What size bulkhed fitting is needed and what screws into the blowoff valve?

 

-8AN bulkhead fitting <img src="gr_images/icons/wink.gif" border="0">

 

Thanks, Fireball <img src="gr_grin.gif" border="0">

 

If it's in the spare tire well.I used -8 90 deg.fitting on bottle,straight fitting at bulkhead conn.

 

Slowhawk, you got a pic of that you can email me so I can get a reminder of what it is I need to do??? <img src="gr_stretch.gif" border="0">

 

Ditto, send me an e-mail as well slowhawk.

 

Of coarse I don't have a good pic of this.But here is what you need:
1- -8 bulkhead fitting and nut
i- -8 striaght AN conn
1- -8 90' AN conn
6' -8 Braided hose
2- Washers for bulkhead fitting
To do:
In bottom of wheel well there is a plug about 2'-remove.Mount bulkhead fitting with red locktight.
Install straight conn on bulkhead conn.
Test fit -8 hose for length before cutting
90'AN goes on bottle.
Just make up the line and screw on.
You can get all the stuff you need from Summit.
If anyone is interested I can make this setup and mail it to them.
Also if you want a Wheel well plate.I can make that too.Just E-mail me if interested.Have pics of wheel well plate w/ bottle mounted.

 

How much??? <img src="gr_grin.gif" border="0"> You know thats the best setup I've seen out of all the pics on several forums. I want that!!!! <img src="gr_grin.gif" border="0">

 

I'll price it out and post it tonight.

 

KEWL <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />

 

The price for the stuff is $85.I can make them and ship it for $110.If you want to make your own just E-mail me and I'll giva ya the part #'s.

 

This will be a definate "NEXT MONTH"
I'll be in touch!! <img src="gr_grin.gif" border="0">

 

Don't know the specific items you're looking at, but you can get that list for 60-65 with some creative shopping.

 

I think I did mine for under 50 bucks <img src="gr_stretch.gif" border="0"> All the stuff came from summit

 

Here's the part# + price.From Summit
EAR-800108:-8 straight conn-$7.75
EAR-809108:-8 90' conn-$20.95
EAR-306008:-8 6' hose-$38.95
AER-fcm2103:-8 bulkhead-$9.95
AER-fcm2103:-Bulkhead nut-$5.25
You haveto supply washers.
Total=$82.25+ shipping

 

I didn't use the 90 degree connection and my hose is much shorter than 6'