4l60e and TnT with VIG3200
Thread Starter
TECH Resident
Joined: Dec 2001
Posts: 777
Likes: 0
From: Mentor, Ohio
4l60e and TnT with VIG3200 How long do you think the stock 4l60e with a Vig 3200 and a B&M trans cooler will last with a TnT wet 100-150hp on a stock 1998 z28 and ET streets?
<img src="graemlins/gr_barf.gif" border="0" alt="[barf]" /> <img src="graemlins/gr_judge.gif" border="0" alt="[judgement]" />
<img src="graemlins/gr_barf.gif" border="0" alt="[barf]" /> <img src="graemlins/gr_judge.gif" border="0" alt="[judgement]" />
Re: 4l60e and TnT with VIG3200 [quote]Originally posted by z28kid98:
<strong>when i had that combo, i had about 30 runs in and no probs what so ever. lots of 1.5 60ft's. good luck.
Chris</strong><hr></blockquote>
That makes me feel better about my set up!! <img src="gr_grin.gif" border="0">
<strong>when i had that combo, i had about 30 runs in and no probs what so ever. lots of 1.5 60ft's. good luck.
Chris</strong><hr></blockquote>
That makes me feel better about my set up!! <img src="gr_grin.gif" border="0">
Re: 4l60e and TnT with VIG3200 On the other side of the coin, I broke both a Pro Yank 4L60E, and a FLP Level IV 4L60E, using a PY3600E converter, and a 125 shot. <img src="gr_emb.gif" border="0"> I destroyed the stock 4L60E with just a 2800 stall and that 125 shot. BTW, that was a NOS 125 shot, not a huge TNT 125 shot.
- Matt
- Matt
Re: 4l60e and TnT with VIG3200 i was only running a tnt 100 shot, but i'm a thinking it's a time to check the trans <img src="gr_stretch.gif" border="0"> if you guys are blowing built ones.
Chris
Chris
