SHOULD I SPRAY NITROUS WITH NO TUNING
Thread Starter
Joined: Nov 2001
Posts: 113
Likes: 0
From: Franklin Kentucky
SHOULD I SPRAY NITROUS WITH NO TUNING I have the nos dry kit stage two heads hammer cam and tpis longtubes ls6 intake but no tuning should i spray it now will it hurt anything or should i wait until i get it tuned i have heard alot of people say both looking for different opinons
thanks bubba
thanks bubba
TECH Regular
Joined: Nov 2001
Posts: 472
Likes: 0
From: Barberton, OH
Re: SHOULD I SPRAY NITROUS WITH NO TUNING Well, personally I would have the PCM reprogrammed and then dynotune with the mods you have listed. Without AT LEAST dynotuning with a MAFT your definately not getting maximum output from that setup! As far as N20 goes if you haven't at least ATAP'd it how would you know if your running lean. Hate to hurt that engine if detonation occured. I wouldn't even hit it with a 75 shot if I were you. <img src="gr_eek2.gif" border="0">
Thread Starter
Joined: Nov 2001
Posts: 113
Likes: 0
From: Franklin Kentucky
Re: SHOULD I SPRAY NITROUS WITH NO TUNING I havent tuned it at all or sprayed it some have told me too go on and do it but i was afraid too since like you said i donty know what is going on with the car who do you guys reccomend to do the tuning any help appreciated
BUBBA
BUBBA
Re: SHOULD I SPRAY NITROUS WITH NO TUNING No, do not spray. With stage II heads and cam and your mods, you have leaned out your A/F quite a bit as it is. Since you have no ATAP to monitor I would not risk my motor even with a 75 shot. It's better safe than sorry IMO <img src="gr_stretch.gif" border="0">
Lean + nitrous(WAY MORE LEAN) = bye bye motor.
Lean + nitrous(WAY MORE LEAN) = bye bye motor.
TECH Regular
Joined: Nov 2001
Posts: 472
Likes: 0
From: Barberton, OH
Re: SHOULD I SPRAY NITROUS WITH NO TUNING Find a dyno shop in your area with wideband 02 capabilities. You'll need a MAFT(mass airflow translator) to make adjustments to your A/F ratio.
Reprogramming can be done in various ways. Do a search for more info on "PCM Reprogramming"
Reprogramming can be done in various ways. Do a search for more info on "PCM Reprogramming"
