Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Mallory Window Switch

Thread Tools
 
Search this Thread
 
Old 03-30-2004 | 01:50 AM
  #1  
y2kta's Avatar
Thread Starter
On The Tree
iTrader: (1)
 
Joined: Apr 2002
Posts: 161
Likes: 0
From: Texas
Default Mallory Window Switch

I have the basic's down but I have a question on one of the orange wires. Does it connect to the solenoids wiring on the green wire on the NX relay or does it connect to the wot switch wiring?

(1)Orange-Solenoids?
(2)Orange-Ground
Black-Ground
Red-Power
Purple-NOT USED
Green-Tach (2000 is #10 white on PCM)
Old 03-30-2004 | 10:36 PM
  #2  
Ed Blown Vert's Avatar
11 Second Club

iTrader: (2)
 
Joined: Nov 2001
Posts: 3,066
Likes: 0
From: Sunny San Diego
Default

I have them same switch, do not connect them to the solenoids.
Old 03-31-2004 | 03:26 PM
  #3  
y2kta's Avatar
Thread Starter
On The Tree
iTrader: (1)
 
Joined: Apr 2002
Posts: 161
Likes: 0
From: Texas
Default

So does the orange wire connect to the activation switch ground side?




All times are GMT -5. The time now is 08:10 AM.