NOS purge
NOS purge I am wanting to install a purge kit on my SS. Would I be able to mount the purge tips in my grill? I have the wings west grill insert. I was wanting to run the shot through both openings of the grill. WOuld this be possible? Would it hurt my paint?
Thanks,
Mike
Thanks,
Mike
Teching In
Joined: Mar 2002
Posts: 8
Likes: 0
From: Tonawanda, NY
Re: NOS purge That is how mine is done. Piece of cake. Just put a "T" on the solenoid, ran rubber hose to the grills and used some clips to secure them.
On my 99 WS6, I had a dual purge which would hit the paint all the time. Never had a problem.
<small>[ April 16, 2002, 11:19 PM: Message edited by: RalphL 02 Sunset SS ]</small>
On my 99 WS6, I had a dual purge which would hit the paint all the time. Never had a problem.
<small>[ April 16, 2002, 11:19 PM: Message edited by: RalphL 02 Sunset SS ]</small>
Teching In
Joined: Mar 2002
Posts: 8
Likes: 0
From: Tonawanda, NY
Re: NOS purge No pics yet but no cutting was necessary. I have since run 3/16" steel tube from the noids right on out the grill. Look closely and you'll see that there is a way to the grill over the styrofoam.
