I've searched...
 

I've searched but cant find anything even posted in the wiring sticky, I've got a micro wot, fpss, msd 8969 DIGITAL ws, and I'm unsure how to wire it all up. I see this but the 8969 has a grey wire...
http://i28.photobucket.com/albums/c2...ringforzex.jpg
Please help, I'm trying to get this installed while I still have a few days off of work.

Are you using a zex box

No just my nx kit and purge. Ive got a paper on how to install that, but the msd 8969 box and fpss.

So just two regular solenoids for a wet kit.

This is what I got, just need info on where to tie in the msd 8969 box.

Where the fuel pressure safety switch goes to ground. Instead hook that tithe yellow wire on the msd8969. The window switch will send the ground signal through the fpss. I would also suggest an inline fuse where the black wire hooks to the positive side of the battery.

Ive got one for that, what about the gray?

The gray on the msd will not be used in your setup.

Ok so where does everything else go.

What do you mean? Just like the diagram you posted.