How do you wire these things??? PLEASE HELP!!
Thread Starter
TECH Fanatic
iTrader: (22)
Joined: Apr 2002
Posts: 1,621
Likes: 2
From: Louisville, Ky
How do you wire these things??? PLEASE HELP!! I bought a used TNT wet kit and it didn't include the instructions, any wiring, relays or switches. Where can I go to find out what kind of relays I need and what size wire and what sitches? Someone said to just have it pofessionally installed because it is too important but $250 is too important to me. I am in no rush, and I will take my time. I went ahead and bought the Matthew Harlan window switch but I still need a WOT switch. I saw a 'regular' and a 'roller' microswitch at Radioshack. They were both $3.99. Are these the right ones. I also need to to make a bracket to mount the WOT on. I just don't even know where to start.
Also, someone said to run the nitrous line outside of the car but everyone on here seems to be running it inside the car. I read a post about how a leak will crystalize your lungs and kill you but ****, the bottle is still in there, how much worse could it be to run the n2o line in there? Is the line even long enough to run outside of the car? The guy from TNT said it was and to just run it along the brake lines but is it even worth the hassle? <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> HELP!!! <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" />
Also, someone said to run the nitrous line outside of the car but everyone on here seems to be running it inside the car. I read a post about how a leak will crystalize your lungs and kill you but ****, the bottle is still in there, how much worse could it be to run the n2o line in there? Is the line even long enough to run outside of the car? The guy from TNT said it was and to just run it along the brake lines but is it even worth the hassle? <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> HELP!!! <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" />
Teching In
Joined: Jun 2002
Posts: 1
Likes: 0
From: Puget Sound
Re: How do you wire these things??? PLEASE HELP!! I wired mine myself - It's not that difficult. Just take your time. Sounds like the switches you are looking at will work. I ran my line outside my car because the track here requires it. Good luck - you'll like the results!
Thread Starter
TECH Fanatic
iTrader: (22)
Joined: Apr 2002
Posts: 1,621
Likes: 2
From: Louisville, Ky
Re: How do you wire these things??? PLEASE HELP!! Where do you start the nitrous line -how do you get it out of the car? What fuses or relays will I need? Where are some good wiring schematics?
TECH Apprentice
Joined: Nov 2001
Posts: 363
Likes: 0
From: Bolingbrook, IL
Re: How do you wire these things??? PLEASE HELP!! I ran mine outside of the car flush with the brake lines. I got the line outside the car by cutting an x in the rubber gromment under the rear seat (under the carpet) I don't know where you have the bottle mounted, but there are rubber gromments all over that you can run the line thru.
Re: How do you wire these things??? PLEASE HELP!! I'm not sure if this will help, as I have a real hard time reading it myself. I have a TNT Wet system and here's how I have my electrical layout for my car
<img src="http://www.nvethis.d2g.com/depot/electric.jpg" alt=" - " />
I know, it's definately busy, but it works flawlessly.
<img src="http://www.nvethis.d2g.com/depot/electric.jpg" alt=" - " />
I know, it's definately busy, but it works flawlessly.
