what intake r u guys running thats cutting these killer times with stock bottom end cars ?

not looking to set a record but i do want to put a good number up on the board.

i will b spraying around a 250.hit

was looking into vic jr and 4150 but i do not want to cut the cowl that bad.
so i am thinking the vic jr and elbow.

what elbow would u sugest ?

 

9.7 at 137 with a stock ls6 and stock ported tb. Going to a vic jr with spray bars in the near future.

 

dang it.
u gonna b using a elbow or 4150?

 

I'm running a vic Jr and a 4150 with a Wilson plate. Trapping over 140 in the 1/4

 

Whiteltone has a vic jr, went 9.19@148, and it's been 150.. Carb'd with a plate.. It fit without cutting the cowl too bad, but you would never be able to adjust the rear float bowl. With a 4150 throttle body like Thad, should fit no problem.

 

cool thanks for all the help i really want to go the 4150 route

i just dont wanna have to cut the cowl up or remove it dont mind trimming it a little lol

 

Just man up and cut the cowl lol,cutting/etc is fine as long as its for a going faster purpose lol

 

Not a fan of the elbow or cutting the car. I say stay with the LS intake or go with a 4150 so there is very little cutting of the cowl.