150 shot help.....
Thread Starter
Teching In
Joined: Apr 2002
Posts: 49
Likes: 0
From: NRH Texas
150 shot help..... i got a 98 z with a NX wet kit. i have a MAFT set at all the way rich (+4 base and +7 wot) when im about to spray. i am trying to use a 150 shot, but im WAYYYYYYYYYYY too lean. scanmaster shows .79-.81 on the bottle, thats with a (44) pill (200 shot gas, and a 62 150 nitrous)
can my car just not handle a 150 shot?
ps. on the 100 shot (52 nitrous and 150 shot gas pill 36, i run .93 volts)
whats the deal?
can my car just not handle a 150 shot?
ps. on the 100 shot (52 nitrous and 150 shot gas pill 36, i run .93 volts)
whats the deal?
11 Second Club
Joined: Nov 2001
Posts: 1,645
Likes: 0
From: Hanover MD
Re: 150 shot help..... probably still need a pump. tnt kits will kill a motor quick if you dont have the fuel setup for it.
i would stay at a 100 shot till you get it figured out. my car went lean and blew a head gasket and then hydro'ed 2 pistons and cracked them. be very very careful!
i would stay at a 100 shot till you get it figured out. my car went lean and blew a head gasket and then hydro'ed 2 pistons and cracked them. be very very careful!
Thread Starter
Teching In
Joined: Apr 2002
Posts: 49
Likes: 0
From: NRH Texas
Re: 150 shot help..... i found the problem guys. you know on the FPSS there is 2 little silver dots? yeah, those are rods that help the fittings flex comming into and out of the switch. my rod was sticking all the way out, which lead to the fuel under WOT to spray everywhere. kinda scary, huh? i thought a FPSS saved your motor <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" /> <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
jason
jason
