My future setup is going to be a 388 solid roller with direct port nitrous. I fully expect to be over 500rwhp N/A and to then hook up a dual stage 200 shot. What am I looking at to support this? I assume that the popular Walbro 340 isn't going to cut it.

 

For that much HP I would get the Racetronix dual intank setup...or get a sump welded into your tank. Then you could setup a return style system and use Aeromotive pumps.

 

Any more ideas? Looks like the fuel system is going to be over 1K.....ouch!

 

500RWHP from a 388CID N/A motor sounds like a bit much. Perhaps you are thinking 500FWHP?

Either way a Racetronix single LT1/LS1 kit is good for over 600 RWHP on the spray.

Call More Performance or ARE for details.
The Racetronix LS1 kit for the metal tanks is currently avaialble. The LS1 kit for the plastic tank cars is being beta tested and should be available soon. The LS1 kit for the plastic tank cars being tested has supported 575RWHP and 690ft/lb tq with plenty of fuel volume to spare. We expect to kit to be able to support over 650RWHP without our pump booster option. More spray to follow! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Jack <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
Racetronix

<small>[ August 27, 2002, 04:03 AM: Message edited by: Racetronix ]</small>

 

Check this out...This is the fuel system you need....http://www.horsepowerstore.com/page.asp?id=1