spraying out of the hole
Thread Starter
TECH Apprentice
iTrader: (24)
Joined: Aug 2009
Posts: 397
Likes: 2
From: Springfield, IL
spraying out of the hole i have the car/mods listed in sig. i am looking at spraying 150 wet shot this year. i will be running a hoosier 26" DR, and also on stock rear end (3.23's). the kit i have is a NX kit, and will be using a HSW microedge. my question is, how do i go about avoiding spraying out of the hole? how do i set the microedge?
im trying to prolong my rear end and hoping it will last this season.
im trying to prolong my rear end and hoping it will last this season.
could always put it on a push button and spray when you want. I had a full kit that kicked on at full throttle, but changed to button. I loved spraying out the hole but that was a 8.8 rear in my ls6 fox
Thread Starter
TECH Apprentice
iTrader: (24)
Joined: Aug 2009
Posts: 397
Likes: 2
From: Springfield, IL
The old ad boasted multi-gear lock out. I'm sure that this feature can be disabled. I know on other window switches this is just done by scrolling through the activation and deactivation points. Say you want to start spraying at 4500 in second you would scroll through the numbers once then set it at 4500 for second gear. To spray out of the hole you would just set it to spray the first time the RPM reaches 4500. It works off either the activation or deactivation I can't remember but that it usually how the gear lock out is achieved. Some people a interrupt wire. Similar to transbrake or clutch interrupter and you just release it after your in the next gear. Something like a shifter or steering wheel mounted button.
I'm sure if you post around you can get someone to e-mail you the manual if you don't get one with your purchase since HSW is no longer with us and their hosting has expired.
Hope this helps.
I'm sure if you post around you can get someone to e-mail you the manual if you don't get one with your purchase since HSW is no longer with us and their hosting has expired.
Hope this helps.
