Bottle Pics
Thread Starter
TECH Apprentice
Joined: Jun 2002
Posts: 301
Likes: 0
From: Fayetteville, NC
Bottle Pics Can anybody send me some pics of there mounting in the spare tire well? I can't seem to figure an easy way to actually mount the bottle to the bottom or side. I really could use some help.
Thanks,
purevilss@aol.com
Thanks,
purevilss@aol.com
Teching In
Joined: Apr 2002
Posts: 43
Likes: 0
From: Paradise, Tx.
Re: Bottle Pics I just made a pattern using cardboard to fit, and then drew it out on quarter inch plywood. It picks up the wing bolt for the jack to secure it. If you use a vent tube just route it through the grommet in the bottom of the spare well and seal it with RTV.
<img src="http://image1ex.villagephotos.com/pubimage.asp?id_=385545" alt=" - " />
<img src="http://image1ex.villagephotos.com/pubimage.asp?id_=385545" alt=" - " />
Thread Starter
TECH Apprentice
Joined: Jun 2002
Posts: 301
Likes: 0
From: Fayetteville, NC
Re: Bottle Pics either you have more room than I in my convert. or your bottle is shorter. I just can't seem to lay mine down, unless it is about 6 inches up from the bottom.
