Nitrous convertors?
Nitrous convertors? I have a Vig 3600 right now, but I'm not getting the 60's that I want, so might be looking to switch. Any ideas?
Presently cut a best of 1.501 with a 100+ shot. MPH is around 125 with a best of 127. I need 60's to be in the 1.45 range. Is there any hope?
Presently cut a best of 1.501 with a 100+ shot. MPH is around 125 with a best of 127. I need 60's to be in the 1.45 range. Is there any hope?
TECH Regular
Joined: Mar 2002
Posts: 407
Likes: 0
From: Wylie, TX
Re: Nitrous convertors? Damm...You're cutting 1.5 60's sprayin and that rear end has held!!!!!!!! You have more luck then most of us. You should be able to cut 1.4's with that converter. What tires are you using? What do you cut off the bottle?
<small>[ October 09, 2002, 07:54 AM: Message edited by: PewterZ ]</small>
<small>[ October 09, 2002, 07:54 AM: Message edited by: PewterZ ]</small>
Re: Nitrous convertors? I have the Vig 3200. I had it build with three extra clutches in it to handle a large shot of nitrous. I believe it was around $200 or so for them. If you are going to have the converter upgraded, I would also have the extra clutches installed. I am going to be upgrading mine to a 4200 stall and I am expecting about 1.4s 60' with my setup.
