For two grudge racers that would not let me post up dated time slips you guys sure are beating your chest out loud in the open.

 

Damn! and it still went faster than an 8.80! I want to see what it will do in the 1/4 with a gear change.

 

As Dave stated, we don't really talk about it much. I cut my best 60ft Saturday night. It's fast

 

What's the limiter set at?

 

7400.

 

Are you getting that much slip in the converter? I have ran 28's all the time with 3.73's and 4.10 and got near the rpm you have and made it thru the 1/4. I have a Nova right now with 4.56's and a 28 and it is doing what yall's is doing. So I dont see how 3.73's are letting it run out of gear. Plus its on a 200 shot but I would assume you are hitting it with a whole lot more

 

Not really, it's a tight converter. Real tight. It's on a 275/60 radial. I don't run quarter much at all. No need to really, we've got 5 local 1/8 mile tracks to choose from.

 

LOL! oooopps.. I guess that is you... I was just thinking, "Man, there's video and talk all over facebook and everywhere else of this blue S-2nickel"...

 

That's me

 

Sounds like you got to be hitting around 155-156 . I wonder if a gear swap would slow it down? Thats the problem with sbe and not wanting to spin it over 7400-7500. Less gear may allow you more room , but, could slow it down. Impressive for sure, but , like you said I would leave the gear , add more jet and run 1/8 mile stuff. I think you could see some 5.30's with more jet in good air.