Im running a ARE 346 short with stage 2 heads and a custom grind cam. Am going to be putting a 100 shot of N20 on it. I know I need a new pump but wondering what injectors to run. I have a 01 so I'm guessing thier 28's now.

I have also noticed that the Accel injectors say for ford or gm and list the same part number. Are the injectors the same? Can I get a set of 30lbs injectors from a buddy who has a mustang?

Thanks

 

I have a 01 WS6 and I put T-Rex fuel pump and 30lb injectors in. My fuel psi runs about 60 on the gauge. We I go WOT my psi drops to about 55-50psi. Depends on the pressure on my bottle when I spray. Fuel is the key to Nitrous. The more the safer. I run my timing at 23 degrees also, 1 degree for every 50 hp is what is wanted. I went alittle more just for sure. Our stock 28lb injectors will handle 400-450RWHP. You can see my Sig for the numbers I run. Remember I loose some because of the timing being low, and the drivetrain cost me for being a A4. Good Luck with you Set-up! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

 

Yes you can use the 30lb svo's.They will plug right in.You can usually get a used set for about 100.00.

 

Thanks Guys

Wow your perssure still drops, even with the add on pump. Would I be better off to put a walbro 340 in the tank. How high are 30lbs good for?

<small>[ December 19, 2002, 12:14 PM: Message edited by: LEATHL_WS6 ]</small>