Just finished the install of the NX remote opener and found it will not open or close the bottle,just kind of rocks the valve a little then nothing. Lots of noise when pushing button ,but will not turn valve. WHY? It is like there is not enough umph to turn it,what can i do,are there any adjustments to this thing for torque? It is on a 15lbs NOS bottle,Kit only is about 1.5 years old. I installed it with the bottle open,anything i can do? <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />

 

i had the same problem, conenct your ground wire to some other ground place(find a good ground place) and watch the miracle

 

Thanks for the info, i will look into both ideas. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> . Grounded at bracket under steering column,will find better ground.Also will check into clutch adjustment at top of motor. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

 

The clutches for the opener are adjustable.Sometimes it needs alittle adjusting.NX makes the openers for ZEX.There is a slight difference in the inner rings diameter.
Dave

 

Thanks for the reply,now the million dollar question.How, do you adjust the clutch? Thanks
Dave

 

How much can clutch be adjusted before things get unhappy inside the opener?

 

Come on guys, tell me how to adjust this clutch for the opener, please. I removed it from the bottle and opened everything up and found nothing that looked like an adjustment to me. NEED HELP. <img border="0" title="" alt="[Embarrassed]" src="gr_emb.gif" /> <img border="0" title="" alt="[Embarrassed]" src="gr_emb.gif" />

 

if you got instructions with it, it tells you how to adjust it. I dont have my instructions here with me to tell you at this moment.

 

http://www.nitrousexpress.com/instal...nerinstall.pdf

<small>[ February 24, 2003, 03:28 PM: Message edited by: Ed LS1 Vert ]</small>

 

Ed LS1 Vert-Thank you for that info,that helps a ton. The instruction sheet that came with the kit was a terrible copy printed on a single sheet of paper and did not have that picture of the clutch on it. Thanks again. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

 

No prob.