Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Nitrous Works

Thread Tools
 
Search this Thread
 
Old Feb 17, 2003 | 11:26 AM
  #1  
WilliamG's Avatar
Thread Starter
Teching In
 
Joined: Jan 2003
Posts: 33
Likes: 0
From: Rowlett,TX
Default Nitrous Works

Is the nitrous works system for the ls1 a quality system and are their noids as good as nx?

I have already made up my mind about gettin N2O and just wanted to know if it is worth the $70 difference.
Reply
Old Feb 17, 2003 | 03:08 PM
  #2  
383LQ4SS's Avatar
TECH Veteran
iTrader: (33)
 
Joined: Nov 2001
Posts: 4,266
Likes: 0
From: Port Richey
Default Re: Nitrous Works

I normally stay nuetral in matters of preference...But I have to say that the experiances Ive had with Nitrous Works kits have been very poor. I have only delt with stang kits and it has been over a year since I touched one of thier kits. Within six months nearly every component had failed including both fuel and nitrous noids as well as both main nitrous feed lines to and from the nitrous noid. Oh...relay too.
That experiance along with several others keep me from purchasing NW products until I see lots of good feedback.

Again...this is just my personal experiance. There may be people out there with better results than me. <img border="0" alt="[burn out]" title="" src="graemlins/gr_burnout.gif" />
Reply
Old Feb 17, 2003 | 08:35 PM
  #3  
WilliamG's Avatar
Thread Starter
Teching In
 
Joined: Jan 2003
Posts: 33
Likes: 0
From: Rowlett,TX
Default Re: Nitrous Works

Thanks for the info and it sounds like nitrous express is the higher quality system.
Thanks again <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Reply
Old Feb 18, 2003 | 10:33 AM
  #4  
Gold Phoenix's Avatar
11 Second Club
iTrader: (1)
 
Joined: Jan 2002
Posts: 1,161
Likes: 1
From: Indianapolis Area
Default Re: Nitrous Works

I am using tbe Universal EFI Kit. I have 100HP jets for the street and 150HP for the track. What I like about Nitrous Works is that the calibrate the nozzles and match the jets to the nozzle for each HP step. Currently, I am running without a bottle heater or purge kit. But not too bad of numbers.
Reply




All times are GMT -5. The time now is 12:50 PM.