Nitrous Outlet Bottle Trade-In Program
01-22-2014, 02:02 AM
#22
I just bought parts of a nitrous system and thought it was all new parts. I'll be exchanging 2 bottles along with everything else I have planned. Looks to be around $2300. With a dual billet bottle holder can you use your care ecu heaters still and would it be hard to put on a temp or pressure gauge? Plan on running (2) 10# in a y format in the rear of a gto. Plan on having u plumb my fast 102. Do I send my fuel rails and injectors in also? I'm guessing you ask for everything up front before doing any custom work? Just want to get everything lined up and set to match the rest of the build on a 4 solenoid, dual billet rails, midnight blue anodized hard lines, same goes for purge at rear of intake, possible custom engraving or no engraving, gto slid down panel, gto fuel cell, put nitrous filter on my shut off valve and put a decent pressure gauge on it. I also need a LnF-2000. I do have a NOS Launcher with LCD I'll add in eventually. Do you guys give a discount for a project of this caliber or is t still not late enough? Would lve to get pics of it on your site when it's done. The fast is painted Midnght blue metallic, letters are in quicksilver metallic and the R is red. Fuel rails are billet and black, fittings are black and silver braided line. Any one that needs to be done I prefer hard line and powder cotes to match intake.if anyone frm nitrous outlet could possibly contact me or help me out I'd greatly appreciate it. Trying to get this done so I can get the car ready for tuning.
01-24-2014, 11:26 PM
#23
I just bought parts of a nitrous system and thought it was all new parts. I'll be exchanging 2 bottles along with everything else I have planned. Looks to be around $2300. With a dual billet bottle holder can you use your care ecu heaters still and would it be hard to put on a temp or pressure gauge? Plan on running (2) 10# in a y format in the rear of a gto. Plan on having u plumb my fast 102. Do I send my fuel rails and injectors in also? I'm guessing you ask for everything up front before doing any custom work? Just want to get everything lined up and set to match the rest of the build on a 4 solenoid, dual billet rails, midnight blue anodized hard lines, same goes for purge at rear of intake, possible custom engraving or no engraving, gto slid down panel, gto fuel cell, put nitrous filter on my shut off valve and put a decent pressure gauge on it. I also need a LnF-2000. I do have a NOS Launcher with LCD I'll add in eventually. Do you guys give a discount for a project of this caliber or is t still not late enough? Would lve to get pics of it on your site when it's done. The fast is painted Midnght blue metallic, letters are in quicksilver metallic and the R is red. Fuel rails are billet and black, fittings are black and silver braided line. Any one that needs to be done I prefer hard line and powder cotes to match intake.if anyone frm nitrous outlet could possibly contact me or help me out I'd greatly appreciate it. Trying to get this done so I can get the car ready for tuning.
You really should call and talk to one of their tech guys about all of this. I read 5 lines into it and I was confused as hell...
01-30-2014, 09:30 AM
#32
This is a badass deal! I had a NOS bottle from 1986 that has been collecting dust around my shop for about 10 years or so that I just sent in.
Brandon check your e-mails, I need a quote for a puck setup for my new project.
Brandon check your e-mails, I need a quote for a puck setup for my new project.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
More bottles are coming in every day! I've actually got 12 more sitting at my desk. Be sure to take advantage of this program! 
