How to acitvate 2nd stage???
Thread Starter
TECH Apprentice
Joined: Jan 2002
Posts: 347
Likes: 0
From: Orlando
How to acitvate 2nd stage??? Hey guys just bought a 2 stage MAF kit, I was thinking of wiring the primary side of the 2nd stage relay into the seconddary side of the 1st stage and then adding a button to activate it. I.e. it would have to have the first stage on to activate the 2nd stage. I have the rpm window switch and fuelpresuure safety that I will hook up with the 1st stage. what do you think/? any other ways to do it, other than going to a n2o computer?
TECH Fanatic
Joined: Oct 2002
Posts: 1,648
Likes: 0
From: F.H,Waterford,Port Huron, MI
Re: How to acitvate 2nd stage??? I have a aircraft swith to turn everything on and then two colored switches red 1 blue 2. The kit looks like a wet one red dry nozzle and one blue nozzle. I can run stage one 24hp or stage two 50hp or both. If I wanted I could run the stage2 to a rpm switch. Oh just so you know 24hp times two is 87hp on my car. So my 2 stage is well over 100hp! <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
9 Second Club
Joined: Feb 2002
Posts: 985
Likes: 7
From: Lake Orion, MI
Re: How to acitvate 2nd stage??? I've got the dual stage NX MAF kit on order and we'll be looking at the same thing that you've just described. All the normal hardware wiring (TPS, FPS guage & Window Switch) for stage 1 with a 100hp shot. Then stage 2 is wired in serial with a mementary switch to kickoff another 75HP shot if you hit the button while stage 1 is active.
Rick
Rick
