MSD window switch on 98 Trans AM
Thread Starter
On The Tree
iTrader: (2)
Joined: Feb 2003
Posts: 123
Likes: 0
From: New Cumberland, WV
MSD window switch on 98 Trans AM The white wire on the MSD window switch goes to the PCM, has anybody here that owns a 98 Fbody hooked one of these up? What wire on the ECM do you connect it to? The guy at MSD said pin 10 white....but that is for 2001-2002 I believe...from the pinout for a 98 I think it is pin 35 (white, Engine Speed Output) on the blue module. Anybody please correct me if I'm wrong...
TECH Fanatic
Joined: Aug 2002
Posts: 1,013
Likes: 0
From: Katy, TX
Re: MSD window switch on 98 Trans AM I have done research and the only thing i need to do is connect the white wire to pin # 35 on the pcm (im clueless here) I know where the pcm is now what? I TTT'ed this post so that you guys know I did a bit of research
Re: MSD window switch on 98 Trans AM If thats what it says just look at the top pcm and hook it to the #35 white wire. I think the PCM has small numbers on it doesn't it? Theres another post floating with almost the same subject.
https://ls1tech.com/threads/showflat...t=1#Post520098
I know on my 01 it was very easy to do. I had already run a wire of my pcm for my harlan shift light. So I just tapped the same wire for the window switch.
good luck
https://ls1tech.com/threads/showflat...t=1#Post520098
I know on my 01 it was very easy to do. I had already run a wire of my pcm for my harlan shift light. So I just tapped the same wire for the window switch.
good luck
