Please help this nitrous and ls1 newbie
Thread Starter
Teching In
Joined: Jan 2003
Posts: 33
Likes: 0
From: Rowlett,TX
Please help this nitrous and ls1 newbie Well for the past couple of months I have been arguing with myself rather I should get N2O or not. I finally purchased the NX kit and was wondering if there was a wiring diagram for the window switch(and purge) and since LS1's have individual coil packs which wire or wires do I cut and what do I splice the white wire into to get the correct rpm range. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
TECH Fanatic
Joined: Aug 2002
Posts: 1,013
Likes: 0
From: Katy, TX
Re: Please help this nitrous and ls1 newbie Check out www.nitrousexpress.com. I think they have instructions online. If not, try doing a search. I know there are threads that contain wiring diagrams. Good luck, and have fun. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Thread Starter
Teching In
Joined: Jan 2003
Posts: 33
Likes: 0
From: Rowlett,TX
Re: Please help this nitrous and ls1 newbie I have searched but i could not find any topic about witch wire the window switch splices into on the pcm i appreciate yalls response and thank you. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
and hopefully i will have it in by tommorow night <img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" />
and hopefully i will have it in by tommorow night <img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" />
TECH Fanatic
Joined: Aug 2002
Posts: 1,013
Likes: 0
From: Katy, TX
Re: Please help this nitrous and ls1 newbie The window switch splices into the #10 pin on the bottom set of wires on your pcm. Check www.installuniversity.com for pics, under the Harlan shift light install article.
Another link that help me out a lot was 98TAauto's TNT install page
Another link that help me out a lot was 98TAauto's TNT install page
