im installing my kit today, but i have a quick question about the power ring, im not sure if its back enough against the TB, or if i should go more. pics are attached. should i push it back more? the b!tch doesnt want to seem to move any further back. thanks!

 

I ussually have to take a dremel to the outside lip on the TB and grind down the ridge alittle,then oil the O-ring in the ring.Sometimes I even tap it on all the way with a soft hammer.

 

Use a rubber mallet. knock it back.

 

thanks guys, i got it on. it was much easier taking the throttle body off and doing it outside the engine bay. now its time to cut the lid